Lakum - KTL s.r.o. - Frydlant nad Ostravici

Company description

Company called Lakum-KTL,s.r.o. was established in 1998 in Frydlant nad Ostravici. Its main task was to make and adjust surfaces of metal products or their parts,mostly in automobile and consumer´s industry,so there was no need for a customer to do further technological operations with it. The company wanted to follow the long-tome tradition of a metal-production in Frydlant nad Ostravici. The company was extended during following 3 years and was devided into 2 divisions: devision of metal-production devision of surface adjustments.

Co Lakum-KTL possess the certificate ISO 9002 which was defended in 2000 and they are about to be holders of the other certificate ISO /TS 2000. In May 2002 this company was transformed from Ltd.(s.r.o.) to PLC(a.s.) We offer an entire service in the branch of sheet compiling and metal profiles and all following operations..

In the other words,if our customer provides us with drawing for production by post ,fax,e-mail(DXF file)or just with idea subject,he will receive a product in a most suitable state for him. Our goods is mostly wrapped,ready to go to a customer.

Lakum-KTL possess vast areas adjusted for metal-production, surface adjustments and its assembly.

Location

Products

METAL-PRODUCTION
We are able to produce parts by great number of technologies. First working on a sheet is made by transverse dividing from a roll on a divide device. It consists of uncoiler, straightener, roll-feeder and fast-running handle press LUD 315 with a possibility of dividing up to a width of a coil 800mm. The company also owns special machine scissors.

The other elaborating of steel sheet can be made either by pulling on double-active crank press 315 tones or by pressing on various handle presses (from power 25 tones up to 315 tones)-see a chart.

Group of CNC

Producing centres,which means cutting CNC centre FINN-POWER and bending CNC centre SALVAGNINI is a separate chapter of Metal-producing of CO Lakum- KTL. Bending centre is specially adjusted for bending of narrow bends. Press brake with 2500 long ram. Products which need long bending are elaborated here.

PIPES ARE CUTTED BY BAND SAW AND BENDED BY PIN BENDING MACHINE.
Group of assembly owns lot of machines for:
point electric-resistant welding, intert-gas shielded welding, It also has resistance welding presses, rivetting machines BALTEC.

ANTIRUST SURFACE ADJUSTMENT OF METALS
Kataphoreting is laying the colour in electrophoretic way, where a coloured thing is kathode in the field of anolyt which goes in a parallel direction (water solution of colour) and it draws kathionts of colour up. We speak about one of the most progessive technologies of laying the basic colour with a high level of antirust protection of metal on. This method ranks among the most modern technologies of surface adjusting for metal products. Nothing can compete with it at the moment. The biggest contribution for development of this technology has an automobile industry, because of antirust resistance of a coachwork. Owing to the high quality which goes hand in hand with economical and ecological advantages, this technology is also used in other branches of machine and consumption industry.

POWDER PAINTING
Electrostatic laying colours on by half -automatic polish device Surface adjustment by powder paint serve for both: protection against rust and mechanic damage improving its final appearance Quality of chemical preadjustment of surface has an influance on antirust characters.

Powder paint is laid by hand or by automatic machine in a Powder cabine in a running device. TRIBO system is used here.

We can use variet types of powder paints in several nuances adjusted for TRIBO-static laying on, according to a customer´s request.

WET VARNISHING
Laying water-diluted substances on by half-automatic device
Upper polish mainly serves for improving estetic features of ready to go product. Because it is laid on the basic varnish, it protects the surface and antirust features of a basic polish are higher.

Varnish is laid by hand-spraying in a running paint line.

It is possible to use common burn-out varnishes as a surface polish.-e.g.varnish from CO Cetelon,Weckerle. Technical features of each varnish depends on its type and ist producer. How thick laid layer will be,according to a desire of a customer, depends on covering features of each varnish and its viscosity.

Materials

• Construction or carbon steel
• Stainless steel

Certificates

• ISO 9002